Dyna Beads 1 OZ Pack
Dyna Beads dynamically balance tires on the move, resulting in a smoother ride, and one that lasts the life of the tire.
Dyna Beads are small ceramic spheres, high in density and perfectly smooth, that travel inside the tire to locate themselves opposite heavy points to eliminate out-of-balance motion.
The result for your customer is not only a smoother ride, but a better look - Dyna Beads eliminate the need for spoke or stick-on weights applied to those beautiful alloys. They can be used with tubes or tubeless tires, and work for scooters as well.
Dyna Beads are 100% environmentally friendly ceramic, impervious to moisture, and non-abrasive to inner liners and tubes. No special air drying is needed, and Dyna Beads can be installed directly into the tire at mounting time, or after, through the valve stem. Everybody wins with Dyna Beads! Advantages Dealer Customer
No spoke / rim weights
A glass-smooth ride
Longer tire mileage
Motorcycle applications are easy for all bikes, 2 wheel or 3 wheel
80 - 120 mm tire width 1 oz
80 - 120 mm tire width (BMW Telelever only) 2 oz
130 mm tire width 2 oz
130 mm - 240 mm width 2 oz
250 mm - 360mm tire width 3 oz
195 - 205 car tires on the rear 3 oz
10" diameter wheels (scooters) 1 oz
12" & Up diameter wheels (scooters) 2 oz
Dual Purpose / Off Road with Rim Locks
Front - 80 - 120 mm tire width 2 oz
Rear - 130 -230 mm width 3 oz
Rim Locks - add one ounce over what you normaly use for that size tire to accomodate the additional weight of the rim lock. Two rim locks opposite each other don't require any more Dyna Beads other than stated above, as they have a tendency to cancel each other out.
Note: Filtered valve cores do not fit all stems. They require a seat 1-1/4" down in the stem. If you cannot use them, simply rotate the tire so the valve stem is about the 6:00 position, then give the valve stem a quick shot of air prior to checking pressure.
Only: $ 3.99